AT&T Generic 1 - Manual (Page 25)

Redial (With Auto-Pause) (8102 and 8110 Users)
■
To program an automatic 1
pause for redialed
numbers
2
3
4
While the telephone is on-hook,
press the PROGRAM button
[programming tone]
Press [ Redial ]
Press the appropriate access code and number of
pauses in order to insert a long enough waiting time
to obtain a second dial tone.
For example, if you need two pauses inserted
between the access code, such as 9, and the
remainder of the telephone number you are dialing,
you would press the PAUSE button twice
Note: You may store up to three different access
code or pause combinations. Each code can have up
to three characters and up to four pauses.
Press the PROGRAM button again
EXAMPLE: In the following example, there are three different access code or pause
combinations.
1
2
3
4
5
Press the PROGRAM button
[programming tone]
Press [ Redial ]
Dial 9 and then press the PAUSE button three times
(PAUSE PAUSE PAUSE). Since each depression of
the PAUSE button adds .5 seconds of waiting time,
this initial access code (three depressions of the
PAUSE button) is 1.5 seconds.
Dial *9 (the second access code needed in the dialing
sequence in this example) and then press the PAUSE
button twice (PAUSE PAUSE)
Dial *8 (the third access code needed in this
sequence) and then press the PAUSE button four
times (PAUSE PAUSE PAUSE PAUSE)
20