Lenovo ThinkPad R50p - Manual (Page 21)

Including Rescue and Recovery in a disk image
You can use your tool of choice to create a disk image that includes Rescue and
Recovery. This deployment guide provides basic information regarding
PowerQuest and Ghost as it applies to this application and installation.
Note: If you plan to create an image, you must capture the Master Boot Record.
The Master Boot Record is critical for the Rescue and Recovery environment to
function correctly.
Using PowerQuest Drive Image based tools with Rescue and
Recovery
If the PowerQuest DeployCenter tool PQIMGCTR is installed in the following
location (X:\PQ), you can create and deploy an image with Rescue and Recovery
with the following scripts:
Minimum script files:
Table 4. X:\PQ\RRUSAVE.TXT
Script language Result
SELECT DRIVE 1 Selects the first hard disk drive.
SELECT PARTITION ALL
(Needed if you have a type 12 partition or if
you have multiple partitions in your image.)
Selects all partitions.
Store with compression high Stores the image.
Table 5. X:\PQ\RRDEPLY.TXT
Script language Result
SELECT DRIVE 1 Selects the first hard disk drive.
DELETE ALL Deletes all partitions.
SELECT FREESPACE FIRST Selects first free space.
SELECT IMAGE ALL Selects all partitions in image.
RESTORE Restores the image.
Image creation:
Table 6. X:\PQ\PQIMGCTR / CMD=X:\PQ\RRUSAVE.TXT /MBI=1 / IMG=X:\IMAGE.PQI
Script language Result
SELECT DRIVE 1 Selects the first hard disk drive.
X:\PQ\PQIMGCTR Creates the image program.
/CMD=X:\PQ\RRUSAVE.TXT PowerQuest script file.
/MBI=1 Captures the Rescue and Recovery Boot
Manager.
/IMG=X:\IMAGE.PQI Creates the image file.
Image deployment:
Table 7. X:\PQ\PQIMGCTR / CMD=X:\PQ\RRDEPLY.TXT /MBI=1 / IMG=X:\IMAGE.PQI
Script language Result
SELECT DRIVE 1 Selects first hard disk drive.
Chapter 2. Installation 13