Lenovo M5400 Touch Notebook - Manual (Page 43)

39
Lenovo B5400/M5400/M5400 Touch
1050 Hard disk drive and solid state disk
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1020 Base cover” on page 35
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard
disk drive is sensitive to physical shock. Improper handling can cause damage and
permanent loss of data.
• Before removing the drive, suggest the customer to backup all the information on
it if possible.
• Never remove the drive while the system is operating or in suspend mode.
Figure 5. Removal steps of hard disk drive and solid state disk
Remove the screw
1
. Detach the HDD connector and then remove the hard
disk drive from the slot in the direction shown by arrows
2
and
3
.



Step Screw (quantity) Color Torque
1
M2 × 4 mm, flat-head, nylok-coated (1)
HDD BKT to BASE Black 1.85+/-0.15 kgf*cm
When installing: Make sure that the HDD connector is attached firmly.