Lenovo IdeaPad U460s - Manual (Page 53)

49
Lenovo IdeaPad U460
1100 LCD unit
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1030 Hard disk drive (HDD) cover” on page 36
• “1040 Hard disk drive” on page 37
• “1050 DIMM cover” on page 38
• “1070 PCI Express Mini Card for wireless LAN/WAN” on page 40
• “1080 Keyboard” on page 42
• “1090 Keyboard bezel” on page 44
Figure 10. Removal steps of LCD unit
Remove five screws
1 . Unplug the LCD connector in the direction shown by
arrow 2 . Release the antenna cables from the cable guides in the direction
shown by arrows
3
.
2
3
3
1
1
1
1
1
Step Screw (quantity) Color Torque
1
M2.5 × 6 mm, flat-head, nylok-coated (5) Black 2.5 kgfcm
When installing:
Route the antenna cables along the cable guides. As you route the cables, •
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the LCD connector is attached firmly and make sure that you
•
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.