Lenovo G50-45 Notebook Lenovo - Manual (Page 64)

60
G50-30/G50-45/G50-70/G50-70m/Z50-70/Z50-75 Hardware Maintenance Manual
1140 LCD unit
For access, remove these FRUs in order:
• “1010 Battery pack” on page 33
• “1020 Base cover” on page 34
• “1030 Optical drive” on page 36
• “1040 Hard disk drive” on page 37
• “1050 PCI Express Mini Card for wireless LAN” on page 39
• “1070 Fan assembly” on page 42
• “1080 Keyboard” on page 44
• “1090 Keyboard bezel” on page 47
• “1100 ODD board and USB&audio board” on page 50
• “1110 System board” on page 54
• “1130 Speakers and DC-in cable” on page 58
Figure 14. Removal steps of LCD unit
Release the antenna cables from the cable guides and then remove the
screws 1.




Step Screw (quantity) Color Torque
1 M2 × 3.5 mm, flat-head, nylok-coated (4)
HINGE + D cover
Black 1.5 ~ 2.0 kgf*cm
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the LCD connector is attached firmly and that you do not
pinch the antenna cables when you attach the LCD assembly. Route the
LCD cable along the cable guides.