Lenovo S20-30 Touch Notebook - Manual (Page 62)

Lenovo S20-30 / S20-30 Touch Hardware Maintenance Manual
58
1120 Antenna assembly and LCD cover
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1020 Hard disk drive” on page 36
• “1030 PCI Express Mini Card for wireless LAN/WAN” on page 38
• “1040 Fan assembly and Heat Sink assembly” on page 40
• “1050 Keyboard” on page 42
• “1060 System board” on page 44
• “1070 LCD unit” on page 48
• “1080 Speakers, base cover, audio board, DC-IN board and power board” on
page 50
• “1090 LCD front bezel” on page 54
• “1100 LCD panel, LCD cable and hinges” on page 55
Figure 13. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
by arrows
.
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
a
a
a