Lenovo ThinkPad T540p - Manual (Page 130)

Table 4. Config menu items (continued)
Menu item Submenu item Selection Comments
black button or Enter
key during the power-on
self-test (POST).
CIRA Timeout 0-255
Note: The default value is
60 seconds.
Set the timeout option for
CIRA connection to be
established. Selectable
second values are from 1 to
254.
If you select 0, use 60
seconds as the default
timeout value.
If you select 255, the
waiting time for establishing
a connection is unlimited.
Console Type • PC-ANSI
• VT100
• VT100+
• VT-UTF8
Select the console type for
AMT.
Note: This console type
should match the Intel AMT
remote console.
Date and Time menu
To change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu.
Then do the following:
1. Use the cursor keys to select System Date or System Time.
2. Type a date or time.
Security menu
To change the security settings of your computer, select the Security tab from the ThinkPad Setup menu.
The following table lists the Security menu items. Default values are in boldface.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
Table 5. Security menu items
Menu item Submenu item Selection Comments
Hardware Password
Manager • Disabled
• Enabled
Manage your power-on
password, supervisor
password, and your hard
disk passwords.
Supervisor Password • Disabled
• Enabled
Refer to “Supervisor
password” on page 48.
Password
114 User Guide