Lenovo IdeaPad S206 - Manual (Page 54)

Lenovo IdeaPad S200/S206 Hardware Maintenance Manual
50
1100 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1030 Hard disk drive” on page 37
• “1040 DIMM” on page 39
• “1050 PCI Express Mini Card for wireless LAN/WAN” on page 40
• “1060 3G Card” on page 42
• “1070 Keyboard” on page 43
• “1080 System board” on page 45
Figure 10. Removal steps of fan assembly and heat sink assembly
Detach the fan connector in the direction shown by arrow .
When installing: Make sure that the fan connector is attached firmly to the
system board.
Remove four screws and single screw .
Step Screw (quantity) Color Torque
M2 × 2.5 mm, flat-head, nylok-coated (4) Black 1.5 kgfcm
M2 × 2.5 mm, flat-head, nylok-coated (1) Black 1.5 kgfcm
a
a
b c
c
b
b
b
b
b
b