Appendix. cru instructions, Replacing the battery pack – Lenovo IdeaPad Y410p Notebook User Manual

Page 35

Advertising
background image

31

Appendix. CRU instructions

Replacing the battery pack

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

To replace the battery pack, do the following:

1

Turn off the computer. Disconnect the AC power adapter and all cables from the computer.

2

Close the computer display and turn the computer over.

3

Unlock the manual battery pack latch

. While holding the spring-loaded battery pack

latch in the unlocked position

, remove the battery pack in the direction shown by the

arrow .

4

Install a fully charged battery pack.

5

Slide the manual battery pack latch to the locked position.

6

Turn the computer over again.

7

Connect the AC power adapter and the cables to the computer.

Notes:
•

The illustrations used in this appendix are for the Lenovo IdeaPad Y510p, unless otherwise stated.

•

The following steps about upgrading and replacing devices are the same for the Y410p and Y510p.

•

Make sure the battery pack has been removed before replacing any devices.

Note: Use only the battery pack provided by Lenovo. Any other battery pack could ignite or explode.

a

b

c

$

%

&

Advertising
This manual is related to the following products: