Appendix a. cru instructions, Replacing the battery pack – Lenovo Z40-75 User Manual

Page 35

Advertising
background image

29

Appendix A. CRU instructions

Replacing the battery pack

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

To replace the battery pack, do the following:
1 Turn off the computer. Disconnect the AC power adapter and all cables

from the computer.

2 Close the computer display and turn the computer over.

3 Unlock the manual battery pack latch .

Slide the spring-loaded latch to

the unlocked position to eject the battery pack

. Lift up the inner edge

of the battery pack, pivoting it on the outer edge .

Gently raise the

battery pack in the indicated direction

to remove it.

4 Install a fully charged battery pack.
5 Slide the manual battery pack latch to the locked position.
6 Turn the computer over again.
7 Connect the AC power adapter and the cables to the computer.

Notes:
• The illustrations used in this appendix are for the Lenovo Z50-70, unless otherwise stated.
• The following steps about upgrading and replacing devices are the same for the Lenovo G40-30/

G40-45/G40-70/G40-70m/G50-30/G50-45/G50-70/G50-70m/Z40-70/Z40-75/Z50-70/Z50-75.

• Make sure the battery pack has been removed before replacing any devices.

Note: Use only the battery pack provided by Lenovo. Any other battery pack could ignite or

explode.

a

b

c

d

1

3

2

4

4

Advertising