Lenovo IdeaPad S10 - Manual (Page 29)

Note:
For detailed information on using Wireless Manager, see the Help for the Wireless
Manager software.
1. Make sure you have enabled wireless radio on your computer.
Note:
The LED wireless indicator will light on when wireless radio is enabled. If the
indicator is off, press the wireless device switch (see “Top view” on page 1) to
enable it.
2. Press Fn + F5, the interface for wireless device settings appears. make sure you
have enabled the wireless WAN.
3. Click Start -> Programs -> Ericsson -> Ericsson Wireless Manager -> Wireless
Manager , the Wireless Manager interface appears.
4. Click Connect. After connection, the name of your network operator appears in
My Operator . The type of mobile standard appears in HSDPA , which may appear
as GPRS, EDGE, UMTS, HSDPA, or others, depending on the type of standard
your network operator provides.
Notes:
1. The Connect button changes to the Disconnect button. Click Disconnect when
you finish using the Internet.
2. Normally, service charges will apply on use of Internet. Refer to your local
network operator for your price plan and other informations.
Securing your computer
This section provides information about how to help protect your computer from
theft and unauthorized use.
Chapter 2. Using your computer 21