Konica Minolta bizhub PRESS C8000e - Manual (Page 42)

IC-601 5-2
5.1 Windows 8/Server 2012 5
5 Manual Installation Using the Add Printer Wizard
This chapter describes the procedure for installing the Windows printer driver using the standard Windows
Add Printer function, without using the installer.
5.1 Windows 8/Server 2012
This chapter describes the procedure for installing the Windows printer driver using the standard Windows
Add Printer function, without using the installer.
For details about how to use the installer, refer to "User’s Guide - Printer".
5.1.1 For Network Connection (LPR/Port 9100/SMB)
In Windows 8/Server 2012, you can install the printer driver either by searching for the printer on the network,
or by creating a new printer port.
Settings of this machine
To use Port 9100, LPR, or SMB printing, you must configure the network settings for the machine in advance.
d
Reference
For details on the network settings for this machine, refer to "User's Guide Main Body".
To use SMB printing in the IPv6 environment, [Direct Hosting Setting] for the machine should be enabled. For
details, refer to "User's Guide Main Body".
Designate the file for the printer driver provided in "EN (en)" folder of each printer driver contained in the Driver
CD-ROM.
Installing the printer driver by searching for the printer using the Add Printer
Wizard
0 Installing the driver to Windows 8/Server 2012 based computers requires the administrator authority.
0
Since the printer is searched for during the installation, be sure to connect this machine to the network
before turning it on.
1
Insert the Driver CD-ROM into the CD-ROM drive.
2
Right-click the Start window, and then click [Devices and Printers] under [All Applications] - [Control
Panel] - [Hardware and Sound].
Items to be configured Description
IP Address In [TCP/IP Settings] of this machine, specify the IP address.
RAW port number To use Port 9100 printing:
In [TCP/IP Setting] for the machine, enable the RAW port number
(default value: [9100]).
LPD Setting To use LPR printing:
In [LPD Setting] for the machine, enable LPD printing.
SMB Setting To use SMB printing:
In [SMB Setting] - [Print Settings], specify NetBIOS Name, Print Ser-
vice Name, and Workgroup.