2 related settings, Related settings – Konica Minolta AU-211P User Manual

Page 33

Advertising
background image

How to Use the Authentication Unit

3

AU-211P

32

3.4.2

Related Settings

This section explains how to configure the SMB TX settings on the MFP that
supports this system.

Client Settings

Configure the setting to perform SMB TX.

On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [SMB Settings] - [Client
Settings].

Item

Description

ON/OFF

Select [ON].

SMB Authentication
Setting

Select the SMB TX authentication method.
When performing SMB TX for a folder accessible in the
Active Directory domain environment, select [Kerberos].
When performing SMB TX in the environment in which
the Active Directory and NT domains are used together,
select [Kerberos/NTLMv2/v1].

User Authentication
(NTLM)

Select whether or not the NTLM user authentication is
performed.

DFS Setting

To perform SMB TX in a DFS (Distributed File System)
environment, select [Enable].

Advertising
This manual is related to the following products: