5 appendix, 1 product specifications, 2 cleaning the authentication unit – Konica Minolta AU-211P User Manual

Page 63: Appendix, Product specifications, Cleaning the authentication unit, 5appendix

Advertising
background image

Appendix

5

AU-211P

62

5

Appendix

5.1

Product Specifications

5.2

Cleaning the Authentication Unit

Wipe the surface using a soft, dry cloth. If the surface is still dirty, moisten a
cloth with mild detergent and thoroughly wring it out before cleaning. Once
the dirt has been removed, moisten a cloth with water, thoroughly wring it
out, and wipe off the detergent.

2

Reminder

Remove this unit from the MFP before cleaning. Loading the USB port
will result in a malfunction.

Take care so that no water gets into this unit when cleaning. If water gets
into this unit, it will result in a malfunction.

Do not clean this unit using organic solvent such as benzene or alcohol.
Doing so will result in a malfunction.

Before disconnecting or connecting this unit, turn the MFP Main Power
off. After 10 seconds or more have lapsed, turn the MFP Main Power on.
Failing to do so may result in a malfunction.

When connecting or disconnecting the USB cable, hold the plug. Failing
to do so will result in a malfunction.

Product name

Authentication unit (PKI-IC card type) AU-211P

Dimensions

70 mm (L) × 70 mm (W) × 10 mm (H)

Weight

60 g

Power supply

USB bus power

Range of
operating temperature

0 to 50°C

Interface

Full speed USB (12 Mbps)

Connector shape

USB A type connector

Compatible card

PKI-IC card (PIV, CAC)

Advertising
This manual is related to the following products: