Konica Minolta Magicolor 5570DNX - Manual (Page 13)

Step 1. Installing Crown Print Monitor+ Manually 13
Installation Notes
Windows XP/2000/NT4
You must be logged on as a member of the Administrator group to
install Crown Print Monitor+. Also, the TCP/IP network protocol must
be installed.
Windows Me/98
The TCP/IP network protocol must be installed to install Crown Print
Monitor+.
Downloading from the Internet
1
Create a new folder on your desktop and name the folder Monitor.
2
From the web site, download the cpmplus.exe file into the folder created
in step 1.
3
Open the monitor folder and double click the cpmplus.exe file
This extracts the files into the monitor folder.
4
Locate and double-click the setup.exe file within the folder.
5
Continue with step 5 in the “Installation” section below.
Installation
If you need to download Crown Print Monitor+ from the Internet see
the steps above; otherwise, continue with the steps below.
If you are updating from an old version of Crown Print Monitor+, you
will be asked whether you want to uninstall the current version.
Choose Yes or OK to restart your workstation when prompted, and
use the same procedure (described here) that you would use for a
new installation.
1
Insert the Software Utilities CD-ROM into the appropriate drive on your
PC.
It runs automatically.
2
Close the AutoInstaller.
3
In Windows Explorer, browse to x:\utilities\crown print monitor, where x is
your CD-ROM drive.
4
Double-click on the setup.exe file.
5
Select the Setup Language, then choose OK.