Konica Minolta Magicolor 5570DNX - Manual (Page 15)

Step 2. Adding a Printer Port 15
5
Select OK.
The Configure Crown Port dialog box closes.
Auto Discovery Option
In this option, the port name and IP address are set automatically. You can
configure the port after completing these steps.
1
Select the Auto Discovery radio button.
2
Select the Search for Printers button.
The Add Crown Port dialog box disappears and you are back in the
printer driver’s Add Port dialog box.
3
Close the Add Port dialog box.
This returns you to the printer driver, where the auto-discovered printers
are displayed.
4
Select the appropriate port name from the drop-down list box.
5
Close the Printer Properties dialog box.
6
Skip to “Step 3. Configuring a Port — Automatic and Manual Installation”
on page 16.
Windows Me/98
1
From the Start menu, choose Settings.
2
From the Settings menu, choose Printers.
3
In the Printers window, right-click on the new printer to display the pop-up
menu.
4
Choose Properties to display the Properties dialog box.
5
Choose the Details tab and then choose Add Port.
6
Select Other.
7
Select Crown Port+ from the list
and then choose OK.
The Add Crown Port window
appears.
If you want to identify the port’s
logical name and IP address
manually, select the Manual radio
button and follow steps for the
Manual Option.
If you want to discover the port’s
logical name and IP address
automatically, select the AutoDiscovery radio button and follow the steps
for AutoDiscovery.