Konica Minolta Magicolor 5570DNX - Manual (Page 17)

Step 3. Configuring a Port — Automatic and Manual 17
Port Configuration Options
Timers
There are three timers to set. For each time, you scroll through a list box and
select a value between 1 and 600 (seconds).
1
Status Update Interval — Determines how often Crown Print Monitor+
updates Print Manager about the printer’s status.
2
Status Request Timeout — Determines how long Crown Print Monitor+
waits before notifying Print Manager that the printer is not responding.
3
Send Request Timeout — Determines how long Crown Print Monitor+
waits for a print job to be sent before returning control to the Windows
Spooler.
Port Settings
To configure the Port Settings
For printers using Crown Port+ printer technology, select Port 9100.
For example, Crown Port+ printers that use Port 9100 include the
magicolor 2350, magicolor 3300, and magicolor 7300.
For printers using Crown technology, select Port 35.
For example, Crown printers that use Port 35 include the 2060, 3260,
4032, magicolor 2, magicolor 330, magicolor 2200 and 2210,
magicolor 6100 and 6110, magicolor 3100, magicolor 3300, and
PagePro 9100.
Audible Alert
If you check the Audible Alert box, you enable the system speaker to beep
when Crown Printer Monitor+ encounters an error writing to the port.
The Audible Alert is not an option for printers using Port 9100.
Output Bin Notification
When this option box is checked, print jobs are displayed in the Windows
print job queue dialog box until they are delivered to the printer’s output bin.
In addition, when this box is checked, print jobs submitted while another job is
printing are not spooled to the printer. Instead, they remain in the Windows
print job queue until the previous job is delivered to the output tray.
Output Bin Notification is not an option for printers using Port 9100.