Konica Minolta Magicolor 5570DNX - Manual (Page 22)

Uninstalling Crown Print Monitor+ 22
Uninstalling Crown Print Monitor+
Use this procedure when uninstalling Crown Print Monitor+.
1
From the Start menu, choose Settings.
2
From the Settings menu, choose Printers.
3
Right-click on your printer and choose Properties.
4
In the Properties window, choose the Details tab, scroll down in the Print
to the following port: listing and select a port not associated with Crown
Print Monitor+.
You need to select a different port because you can’t delete an
active port.
5
If yo have more than one printer using Crown Print Monitor+, repeat steps
3–4 for each additional printer.
6
From the Settings menu, choose Control Panel.
7
In the Control Panel dialog box, choose Add/Remove Programs.
8
Choose Apply and then choose OK.
9
Choose Add/Remove.
10
When a dialog box displays, asking you if you want to uninstall Crown
Print Monitor+, choose OK.
If a dialog box appears saying that a locked file (crnxmon.dll) was
detected, choose the Reboot button.
11
When the uninstall is complete, choose Yes to restart your computer.
12
Click Finish.
All files that are associated with Crown Print Monitor+ installation
are removed.