Konica Minolta KIP 9900 - Manual (Page 4)

KIP Cloud Apps
Setup of Cloud (Driverless) Printing
Installing the Cloud printing application is as simple as pushing an update patch to the KIP IPS.
(7.3 and higher include the plug in preinstalled at the factory)
Once the Driverless printing application has been downloaded do the following:
1. Extract the KIP update from the .zip file
2. Using KIP PrintNET (use your web browser – typing in the IP address of the printer - this can
be found on the ? screen at the printer.)
3. Log in to the Printer Config page
4. Upload Patch
5. Browse for the file you just extracted
6. And select Save.
7. The IPS screen will turn RED with a message “Please wait Updating IPS”
8. IPS will Reboot
9. This will install a service that will allow the driverless printing application to function
properly.