Konica Minolta bizhub 282 - Manual (Page 139)

5 Control Panel Settings
5-32 362/282/222
Control Panel Settings
Chap
te
r 5
Specifying whether or not the use of TCPSocket is prohibited (mode
477)
Specify whether or not the use of TCPSocket is prohibited.
2
Note
If the use of TCPSocket is prohibited, software such as PageScope Box
Operator cannot be used.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page
Reference
7, 6, 5, 4 ---------- 0000 * Do not change these
bits when specifying set-
tings for this function.
----------
3 Specifies whether or not the
use of TCPSocket is pro-
hibited. 0 Permitted ----------
1 Prohibited
2, 1, 0 ---------- 000 * Do not change these
bits when specifying set-
tings for this function.
----------
362.book 32 ページ ２００８年１０月２０日 月曜日 午前１１時３２分