3 scanning and saving the data (scan to hdd), Available functions/parameters, Scanning and saving the data (scan to hdd) -7 – Konica Minolta bizhub 282 User Manual
Page 30: Available functions/parameters -7
Saving documents
2
362/282/222
2-7
Sa
vi
n
g
do
cu
men
ts
Chapter 2
2.3
Scanning and saving the data (Scan to HDD)
Scan data can be saved in an HDD box on the machine’s internal hard disk.
The following procedures describe operations that must be performed and
the settings that must be specified when touching a single button to save a
document.
Available functions/parameters
Touch [Quality & Reduction] or [Menu] in the screen that appears after the
[Fax/Scan] key in the control panel is pressed, and then specify settings for
the following functions/parameters when saving the scanned document.
2
Note
The following Quality & Reduction parameters have no effect, even if set-
tings have been specified.
- “Reduction” on the Reduction/Area tab
Quality/Reduction screen
2
Note
The following Menu functions and parameters have no effect, even if set-
tings have been specified.
- “TSI” on the Setting 1 tab
- “Rotation TX” on the Setting 1 tab
- “Subject Selection” on the Network tab
- “Reply Address” on the Network tab
Menu screen
Parameter
Description
Page
Reference
Quality
Select the scanning resolution (amount of details).
Density
Specify the density for scanning.
Reduction/
Area
Original
Size Set.
Select the desired standard size for the area to be
scanned.
362.book 7 ページ 2008年10月20日 月曜日 午前11時32分