Konica Minolta KN-419 - Manual (Page 46)

Using PageScope Light/Network Management Utility Light 8
KN-419 8-3
8.2 System Requirements
PageScope Light/Network Management Utility Light can be used in the
following system environments.
8.3 Accessing PageScope Light/Network Management
Utility Light
PageScope Light/Network Management Utility Light is accessed directly
using a Web browser.
1 Start up your Web browser.
2 Enter the IP address of the copier into the URL box, and then press
the [Enter] key.
http://<copier_IP_address>/
❍ (Example) If the copier IP address is 192.168.0.10, enter:
http://192.168.0.10/
3 The PageScope Light/Network Management Utility Light screen
appears.
✎
Note
In order to access PageScope Light/Network Management Utility
Light, an IP address must be assigned to the copier.
8.4 Using PageScope Light/Network Management
Utility Light
PageScope Light/Network Management Utility Light is used in the same
way as other Internet Web pages. Click on links in the page to jump to that
page, and use the [Back] and [Next] buttons to navigate through pages
that have already been loaded.
OS Windows 95 (OSR 2.5), Windows 98,
Windows 98 SE, Windows ME, Windows NT
4.0, Windows 2000, or Windows XP
Browser Microsoft Internet Explorer 4.0 or later
Netscape Navigator 4 or later