Konica Minolta bizhub C650 - Manual (Page 168)

C650 5-12
Sending a user box document 5
The entered addresses appear under "Broadcast Destinations".
2
Note
Frequently entered user names and domain names can be registered to be recalled and used again.
Prefixes and suffixes must first be registered in Administrator mode.
Directly specifying an SMB destination
Settings can be specified for the following.
2
Note
If "Manual Destination Input" (displayed by touching [Security Settings] on the Administrator Settings
screen, then [Security Details]) is set to "Restrict", [Direct Input] does not appear.
1
From the Use Document screen, select the document to be sent, and then touch [Send].
2
Touch [PC (SMB)] on the Direct Input tab.
A screen appears, allowing you to type in the host name for the destination and the file path.
3
Enter the information for the destination, and then touch [OK].
– To check the contents of the shared folders, touch [Reference].
Parameter Description
Host Name Specify the host name (in uppercase letters) or IP address for the destination. Type us-
ing the keyboard that appears, and then touch [OK].
File Path Type the path to the destination folder in uppercase letters.
User Name Type in the user name used to log on, and then touch [OK].
Password Specify the password. Type using the keyboard that appears, and then touch [OK].
Reference Check the structure of the folders on the destination computer. This can be used to
directly specify the destination folder.