Konica Minolta bizhub 4050 - Manual (Page 48)

[Introduction] 7-4
7.2 Changing the angle of the Control Panel 7
7.2 Changing the angle of the Control Panel
The angle of the Control Panel can be adjusted within the range shown below.
To adjust the angle of the Control Panel, tilt the Control Panel up and down.
NOTICE
When a USB memory device is installed, do not change the angle of the Control Panel. Contact with the
Control Panel or damage to a USB memory device may result depending on the size or shape of the USB
memory device.
Tips
If the optional Keypad is installed, you cannot change the angle of the Control Panel.