Konica Minolta KIP 7100 - Manual (Page 37)

KIP PrintNET
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc.  2011 KIP America, Inc.
- 31 -
Printer Configuration
Basic Configuration
Basic Configuration enables administrators, key operators and service personnel to configure
parameters for the KIP printer.
Printer Name: Type a descriptive name for the KIP device. Useful if more than one of the same KIP
printer exists in the facility.
Copy Density Value: Configures the density of the printer toner output from Dark to Light. Density
settings may be set from the IPS touch screen in the Configuration menu.
Output Rotation: Rotate for faster printing ensures that the printed output is sent to the widest roll
available (long edge first). Rotate for Least Paper Usage calculates the percentage of paper to be
used and will output to the roll with the least amount of paper waste.
Historical Queue: Configure the amount of physical hard drive space is to be allocated to store jobs
that have been printed. Values are from 0-25 GB. Users may recall previously printed jobs using KIP
PrintNET, KIP Request and the KIP Touch Screen interface (if enabled).
Reprint: Configure the behavior of the IPS if a jam occurs. Reprint Jam (in or mm) calculates the number
of images to reprint based on the value set. (e.g. If 48 inches is set and a user is printing 36x48 sheets,
the printer would reprint 1 image based on this setting). Reprint Jam Copies will automatically reprint a
specified number of images. Jam Reprint Prompt when enabled, prompts the user at the touch screen
the number of copies to reprint.
Print Setting: Configure behavior of paper selection handling. Closest prints the output image to the
closest fitting roll. Image may be rotated automatically to fit. Center prints the output image to the