Konica Minolta KIP 7100 - Manual (Page 40)

KIP PrintNET
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP America, Inc.  2011 KIP America, Inc.
- 34 -
• Upload Fonts – Select fonts to be uploaded and installed to the local KIP IPS. Installed Fonts
display the current list of fonts that are installed at the IPS. To add fonts, select the Upload Font
button and browse the local workstation or server PC for .ttf (True Type Fonts). Select Open to
install the fonts at the IPS. No further action is necessary at the IPS.
• Upload Patch – Upload patches and software upgraded without installing additional software.
Custom Media Types: Configure additional media types. Enter descriptive names for media to be
selected from KIP IPS Client Applications.
Monochrome DWF Processing:
• Gamma – Controls gamma of output image. Negative numbers are lighter image output.
• DWF Min Lineweight – Minimum line thickness in pixels. If an image has a line that is thinner than
the specified lineweight, the thickness will be increased.
• Clip to Image Size – When enabled, ignores the paper space of the image and will print the
image space.
Upload Fonts
Fonts are an integral part of any file or stamp. With PrintNET 7.2, it is possible to upload fonts from a
networked PC directly to the IPS. These fonts will be installed automatically by the IPS software.
Installed Fonts display the current list of fonts that are installed at the IPS. To add fonts, select the Upload
Font button and browse the local workstation or server PC for .ttf (True Type Fonts). Select Open to
install the fonts at the IPS. No further action is necessary at the IPS.
Folder Configuration
If a folder is available the folder configuration settings will allow an Administrator to set up desired folder
packets. Note: This is should only be done by a technician trained on folder setup.