Konica Minolta AU-211P - Manual (Page 13)

Getting Started 2
AU-211P 12
2.3.3 Correcting the MFP Time
You cannot log into Active Directory if the MFP system time is extremely
different between the MFP and Active Directory. Correct the MFP time so it
matches the Active Directory time with the system time.
Time Adjustment Setting
On the MFP control panel, press the [Utility/Counter] key, and then
[Administrator Settings] - [Network Settings] - [Forward] - [Detail Settings] -
[Time Adjustment Setting].
Page 1/2
Page 2/2
Item Description
ON/OFF Select [ON].
Auto IPv6 Retrieval To automatically obtain the IPv6 address of the NTP
server, select [ON].
This item is necessary when IPv6 is used while DHCPv6
is enabled.
Host Address Specify the host address of the NTP server associated
with Active Directory.
Port Number Specify the port number.
Set Date Correct the time.
Item Description
Auto Time Adjustment When an automatic time correction is made, select
[ON].
Polling Interval When [ON] is selected for Auto Time Adjustment, set the
polling interval.