Konica Minolta AU-211P - Manual (Page 24)

How to Use the Authentication Unit 3
AU-211P 23
!
Detail
When Account Track is enabled, use the PKI card to perform user
authentication before account authentication. When Account Track is
enabled on the MFP that supports this system, user authentication is
forcibly associated with account authentication.(No entry is required for
account track authentication after the first time.)
3.1.2 Logout
To log out the MFP, pull the PKI card out of this unit.
!
Detail
• If a PKI card is used to log in to the MFP, you cannot log out by pressing
the [ID] key on the control panel.
• If the MFP sub power is turned off while logging in using the PKI card, you
will be logged out of the MFP.
• When the time for the system auto reset function is specified, the function
will activate and you will be logged out automatically if the MFP is not
operated for the specified time. If no operations are carried out for over 1
minute while you are logged in, you will be logged out automatically even
when the system auto reset function is set to [OFF].
• In order to prevent the card from being left in the unit, the caution sound
can be issued when you are logged out automatically.To activate the
caution sound, select [Sound Setting] - [Caution Sound] in the
Accessibility Setting screen. Then, set [Simple Caution Sound (Level 1)]
to "Yes".