Konica Minolta AU-211P - Manual (Page 54)

How to Use the Authentication Unit 3
AU-211P 53
3.7.4 Handling Scan To Me
The following explains how to handle Scan To Me on the MFP.
!
Detail
• If the correct settings are configured to use Scan To Me, [Me] appears on
the Fax/Scan screen to send data to the user's e-mail address.
• If the system fails to obtain the certificate in the PKI card when encrypting
the e-mail to the user's address using the PKI card, [Me] will not appear.
For details on the e-mail encryption setting, refer to "Scan to E-mail (S/
MIME) Using the PKI Card" (page 36).
1
Press the [Fax/Scan] key on the control panel.
2
Specify scan conditions in [Scan Settings], [Original Settings], and
[Communication Settings].
3
Press [Me].
4
Load the original and press the [Start] key on the control panel.
This scans the original and sends data to the user's e-mail address.
2
Note
For details on scan conditions, refer to the User's Guide [Network Scan/
Fax/Network Fax Operations] supplied together with the MFP.