Konica Minolta BIZHUB C253 - Manual (Page 47)

C253/C203 2-36
Administrator Operations 2
2.8 S/MIME Communication Setting Function
When access to the Administrator of the machine by the Administrator Settings is authenticated, the machine
enables the setting of encryption of text of e-mail transmitted and received between the PC and the machine.
2
Note
Be sure to set [Always add signature] or [Select when sending] for Digital Signature.
2.8.1 Setting the S/MIME Communication
2
Note
Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
For encryption strength, select the strong "3DES," "AES-128," "AES-192," or "AES-256." If the mail
software being used does not support AES, encrypted mail messages may be received, but they cannot
be decrypted. Use AES-compliant mail software or select the encryption strength that is the strongest
of all compliant with the currently used mail software.
!
Detail
Each encryption strength code represents the following.
Name: encryption algorithm: encryption key length
3DES: 3 key triple DES: 168 bits
AES-128: AES: 128bit
AES-192: AES: 192bit
AES-256: AES: 256bit
<Setting can be made only from the control panel>
0 For the procedure to call the Administrator Settings to the display, see "Accessing the Administrator
Settings" on page 2-2 .
1
Call the Administrator Settings to the screen from the control panel.
2
Touch [Network Settings].
3
Touch [E-Mail Settings].