Konica Minolta bizhub PRO C500 - Manual (Page 14)

14
About Configure button
When logging in the Fiery WebTools as Administrator, [Configure] button appears at the left.
Administrator can limit access to the following features of Fiery WebTools after clicking [Configure].
• [Configure] does not appear when logging in the Fiery WebTools as Operator or Guest.
• If Operator or Guest logs in the WebTools and the necessary features do not appear, contact the controller's administra-
tor.
1.
Click [Configure] then the function list appears at the top left. All the check boxes are
checked.
2.
Uncheck the check box of the function then click [OK] to limit the access.
Unchecked function is immediately disappears from the function list at the left top.
When password is not set to Fiery WebTools, all users automatically log in as Administrator authority.