Konica Minolta bizhub PRO 1200 - Manual (Page 12)

Introduction 1
bizhub PRO 1200/1051 Scanner 1-7
In
tr
od
uc
ti
on
Chapter 1
1.2.4 How to read this Manual
7 Using the Network Scanner Features
7-10
7.3 Storage on the HDD-B
When you store the scanned data on the HDD-B, necessary procedures de-
pend on whether or not the boxes are registered in advance.
!
Detail
Refer to the following pages.
"When a Box is Already Registered"................................... p.7-10
"When a Box is Not Registered" ......................................... p.7-12
For more information of HDD-B to be used, refer to “About the HDD” on
page 2-2.
When a Box is Already Registered
1
Press [SCAN] on the touch panel.
The Select Destinations/Storage Locations screen appears.
2
Press the [HDD] key.
– In the initial settings, the Select Destinations/Storage Locations
screen (E-Mail) is displayed. For information on the initial settings of
the [SCAN] screen, contact your administrator of the copier.
3
Press the Name of the Box No..
– You can refine the registered destination by the search function.
For more information on how to search, refer to "How to Search" on
Page 3-7.
– You can refine the Name by the search function. For more informa-
tion on the search function, refer to "The keys on the Select Desti-
nations/Storage Locations Screen" on Page 7-2.
7 Using the Network Scanner Features
7-10
7.3 Storage on the HDD-B
When you store the scanned data on the HDD-B, necessary procedures de-
pend on whether or not the boxes are registered in advance.
!
Detail
Refer to the following pages.
"When a Box is Already Registered"................................... p.7-10
"When a Box is Not Registered" ......................................... p.7-12
For more information of HDD-B to be used, refer to “About the HDD” on
page 2-2.
When a Box is Already Registered
1
Press [SCAN] on the touch panel.
The Select Destinations/Storage Locations screen appears.
2
Press the [HDD] key.
– In the initial settings, the Select Destinations/Storage Locations
screen (E-Mail) is displayed. For information on the initial settings of
the [SCAN] screen, contact your administrator of the copier.
3
Press the Name of the Box No..
– You can refine the registered destination by the search function.
For more information on how to search, refer to "How to Search" on
Page 3-7.
– You can refine the Name by the search function. For more informa-
tion on the search function, refer to "The keys on the Select Desti-
nations/Storage Locations Screen" on Page 7-2.
bizhub PRO 1200/1051 Scanner
Reminder!
Explains important notices
on operating procedures.
[ ] are used for the terms
displayed on the screens.
Detail
Hints and Advices on
operating procedures.
Note
Explanations to supplement
the body.
Memos may be included in
the body.
Describes operating
procedures.
Show an object and feature
of a procedure.
This page does not exist in the document.