Konica Minolta bizhub PRO 1051 - Manual (Page 157)

PCL Printer Driver Setting (Windows) 8
bizhub PRO 1200/1200P/1051 Printer 8-26
Output Method - Wait Mode/Proof Print/Proof and Print (1st sheet)
Outputs the test print and checks current setting from the control panel of
copier. Use this when printing a large volume document, such as multiple
sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Preferences] to open the [Printing Preferences] window.
3
Select [Wait Mode], [Proof Print] or
[Proof and Print (1st sheet)] in the
[Output Method].
– Select [Wait Mode] to wait before
printing the document to check
the current setting from the con-
trol panel of copier.
– Select [Proof Print] to print the
one copy as a test to check the output and the current setting from
the control panel of copier.
– Select [Proof and Print (1st sheet)] if you want to print only the first
page for checking the current setting.
4
Click [OK] to close the [Printing Preferences] window.
5
Click [Print] to perform printing from the application.
– When [Wait Mode] is selected, it stops without being printed.
– When [Proof Print] is selected, only one set is printed and it stops.
– Select [Proof and Print (1st sheet)] if you want to print only the first
page for checking the current setting.
The copier is stopped temporarily and the Mode Check screen is dis-
played.
6
Confirm the current settings.
– If you do not change any setting,
proceed to the step 9.
– Click [Suspended] to move the
JOB to [Suspend] in the JOB list.
– When [Proof Print] is selected,
only one set is printed and it
stops.
– If [Proof and Print (1st sheet)] is
clicked, only the first page is printed and the copier is stopped tem-
porarily.