Print position settings, Print type, Adhesive binding – Konica Minolta bizhub PRO 1051 User Manual
Page 166: Binding position
PCL Printer Driver Setting (Windows)
8
bizhub PRO 1200/1200P/1051 Printer
8-35
Print Position Settings
When [Print Position Settings] is selected, [Print Position Settings] dialog ap-
pears.
Print Type
Selects the print type among 1-Sided, 2-Sided and Booklet.
1-Sided prints on one side of the paper.
2-Sided prints on both sides of the paper.
Booklet prints on both sides of the paper and fold the paper. Booklet prints
in order which every folded page appears in their original order when gath-
ered at the end.
Adhesive Binding
Selects when doing adhesive binding using an adhesive binder.
The [Adhesive Binding] cannot be set in the following cases:
-
When an item other than [2-Sided] is selected in the [Layout] tab - [Print
Type].
Binding Position
Sets the binding position for the document to be printed. The position select-
ed here will be the position of stapling, punching and base position of the im-
age shift.
Top
Print using the top of the paper.
Center
Print using the center of the paper.
Bottom
Print using the bottom of the paper.