Printer memory, Stapler, Saddle-stitcher – Konica Minolta bizhub PRO 1051 User Manual
Page 253: Stacker, Multi folder, Paper source unit, Large pi, Perfect binder, Multi hole punch unit
PostScript PPD Printer Driver setting (Mac OS X)
10
bizhub PRO 1200/1200P/1051 Printer
10-2
The method to open the [Printer Info] window (v10.3)
1
Double-click [Applications] - [Utilities] - [Printer Setup Utility] in a hard
disk with system.
The [Printer List] window appears.
2
Select the printer and then select [Show Info] from Printers menu.
–
[Printer Info] window appears.
Printer Memory
A memory is specified that is used by the image controller. The selection of
“1GB ” is available. However, it cannot be used.
Stapler
Selects an installed Stapler.
Saddle-Stitcher
Selects an installed Saddle Stitcher.
Stacker
Selects an installed Stacker.
Multi Folder
Selects an installed Multi Folder.
Paper Source Unit
Selects an installed paper source.
Large PI
Selects an installed Cover Sheet Feeder.
Perfect Binder
Selects an installed Perfect Binder.
Multi Hole Punch Unit
Selects an installed Multi Hole Punch Unit.