Konica Minolta bizhub PRO 1051 - Manual (Page 328)

Utility Tool 13
bizhub PRO 1200/1200P/1051 Printer 13-28
1
Open the /etc/printcap file.
– Make an entry naming the network interface card as the remote
host and PRINT as the remote printer name. A typical printcap entry
is as follows:
– <printer_name>\ (for example, lprprinter)
:lp=:\
:rm=<remote_host>:\ (for example, name as entered in /etc/hosts)
:rp=PRINT
:sd=/usr/spool/lpd/<printer_name>:
(for example, spool directory on system used to spool data and
control files)
This entry will send jobs spooled at /usr/spool/lpd/<printer_name> to
the printer designated <printer_name> to be printed at PRINT (the in-
ternal connection to the printer) of the network interface card designat-
ed as <remote_host>.
2
Create the spooling directory. For example, type:
– mkdir /usr/spool/lpd/<printer_name>
3
To print via the spooler, use the lpr command. Type:
– lpr-P <printer_name> < file_name>
– Installation and testing are done. You are now ready to print.
Setting Up an AIX version 3.2.5 Remote Printer to Use lpd
Use the following procedure to set up a remote printer on the host that sends
jobs to the network interface card using the lpd of the network interface card.
1
At the prompt, type:
#smit spooler <cr>
2
When a window appears, select [Manage Remote Printers].
3
When a menu appears, select [Client Services].
4
Another menu appears, select [Remote Printer Queues].
5
Another menu appears, select [Add a Remote Queue].
6
When a window appears, change the values shown to configure the
network interface card.
– The values displayed are default values. You must replace the short
and long form filter values with the values shown in the following ta-
ble.