Konica Minolta bizhub PRO 1051 - Manual (Page 330)

Utility Tool 13
bizhub PRO 1200/1200P/1051 Printer 13-30
Setting Up an HP-UX Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to the network interface
card using the lpd of the network interface card. To do this:
1
At the prompt, type:
– sam
2
When a window appears, select [Printer/Plotter Manager].
3
When the menu appears, select [List printer and plotters].
4
When a list appears, select [Actions] in the title bar.
5
From the pull-down menu, select [Add Remote Printer].
6
When a window appears, add values to configure the network interface
card.
7
At the bottom of the screen, select [Remote Printer is on BSD system]
from the three choices available.
8
Click on the [OK].
9
Ping the unit to test communications. Type:
– ping <IP address of the network interface card>
10
Ping should confirm your IP address with the message:
– <IP address of the network interface card> is alive
11
If the connection is confirmed, you can now print.
See example below.
Data Requested Example Description of Input Data
Printer Name myprinter name to be used in lp com-
mand
Remote System Name fastprint Network Interface Card host-
name as in /etc/hosts
Remote printer Name PRINT lpd queue name