Konica Minolta bizhub PRO 1051 - Manual (Page 43)

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard) 4
bizhub PRO 1200/1200P/1051 Printer 4-11
4.2.3 Network connection (Web Service print)
In Windows 7, Web Service print-supporting printers on the network can be
located and installed.
TCP/IP setting for this machine
Specify the IP address on TCP/IP Setting of this machine.
For details on specifying the IP address of this machine, refer to the User’s
Guide [POD Administrator’s Reference or Main Body].
Web Service setting for the copier
Enable Web Service printing in “Web Service Setting” of the copier.
For details on specifying the Web Service Setting of this machine, refer to the
User’s Guide [POD Administrator’s Reference or Main Body].
!
Detail
You may be possible to skip step 6 to 8 to install faster by selecting [No
let me choose what to do] - [Never install driver software from Windows
Update] in the [Hardware] tab in the [System Properties] screen.
Install a printer through the network window
0 The installation should be performed by a qualified system administrator
or printer administrator.
1
Turn on the power of the machine while it is connected to the network.
– To allow printers to be detected during installation, the machine
must be connected to the network.
2
To use the Web Service print, check that “Network discovery” is
enabled in “Network and Sharing Center” - “Change advanced sharing
settings” on the computer.
3
Insert the Driver CD into the CD-ROM drive of the computer.
4
Select [Start] - [Control Panel] - [Network and Internet], and click [View
computers and devices on the network] under [Network and Sharing
Center].
The Network window appears, showing the computers and devices on
the network.
5
Right-click the device name, and then select [Install].
[Driver Software Installation] dialog box appears.