Konica Minolta bizhub C353P - Manual (Page 23)

C353P 2-8
Administrator Operations 2
2.2.2 Setting the EnhancedSecurity
2
Note
When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Do not leave the machine with the setting screen of Admin. Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin. Settings.
<Setting can be made only from the control panel>
0 For the procedure to call the Admin. Settings to the display, see "Accessing the Admin. Settings" on
page 2-2 .
1
Call the Admin. Settings to the screen from the control panel.
2
Press the [,] key to select [Security Settings].
3
Press the [Menu/Select] or [)] key.
4
Press the [,] key to select [EnhancedSecurity].
5
Press the [Menu/Select] or [)] key.
6
Press the [+] and/or [,] key to enable the EnhancedSecurity and select [ON].
? What is the factory setting for the EnhancedSecurity?
% The EnhancedSecurity is factory-set to [OFF]. Be sure to turn [ON] the EnhancedSecurity so as to
enable the security function of the machine.