Konica Minolta bizhub C353P - Manual (Page 81)

C353P 4-2
Application Software 4
4 Application Software
4.1 PageScope Data Administrator
PageScope Data Administrator is an application for management purpose that allows the network setting
information registered in the machine to be edited or registered from a PC connected over the network.
It allows the network setting information to be downloaded in your PC, edited on the PC, and then written in
the machine.
2
Note
Make sure that none of the general users of the machine will know the Administrator Password.
If the Administrator Password is forgotten, it must be set again by the Service Engineer. Contact your
Service Representative.
Do not leave the site while you are gaining access to the machine through PageScope Data Adminis-
trator. If it is absolutely necessary to leave the site, be sure first to log off from the PageScope Data
Administrator.
4.1.1 Gaining access from PageScope Data Administrator
<From the PC>
1
Start the PageScope Data Administrator.
2
Select this machine from Device List and click [Address, Authentication, Administrator settings].
3
Check the settings on the "Import device information" screen and click [Import].