2 operation flow, Operation flow -5 – Konica Minolta bizhub 751 User Manual
Page 41
Advanced Function
5-5
Image Panel
5
5.3.2
Operation flow
This section describes the operation flow from scanning documents until sending them, by operating the
Image Panel in the order of "scanning documents", "editing" and "specifying the destination".
2
Note
It is also possible to specify the destination first, and then scan documents.
Scan the document in the Data Source area.
•
To scan an original, position the original and then touch [Scan]. Specify the scan settings as required, and then
start scanning. For details, refer to
•
To use a document saved in a user box, select a user box from [User Box List], and select a document to be loaded.
For details, refer to
"Load from user box" on page 5-7
•
To use a document saved in an external memory, select the Media tab in the User Box List screen, and then select
a document to be loaded. For details, refer to
"Load from external memory" on page 5-7
Select [Scan]
Select [User Box List]
Edit the scanned document in the Edit tool area as necessary.
For details, refer to
.
Specify the destination of scanned documents in the Data destination area.
•
To print a document, touch [Print]. For details, refer to
•
To send a document, select the destination from [Destination List]. For details, refer to
.
•
To save in an external memory, touch [Media] in the Destination List screen. For details, refer to
Select [Print]
Select [Destination List]