Konica Minolta 8050 - Manual (Page 10)

Connecting to the USB Port 3
7216/7218/7220 3-1
3 Connecting to the USB Port
✎
Important!
Be sure to use a shielded USB cable. Use of an unshielded cable may
result in radio interference.
1 Make sure that the copier and the computer to be connected to the
copier are turned OFF.
2 Connect one end of the USB cable to the USB port of the copier.
This completes the connection.
✎
Note
USB1.1 is only supported on Windows 98, Windows Me, Windows
2000, and Windows XP.
Connect
Copier
PC