Konica Minolta NC-503 - Manual (Page 93)

5 Registering destinations
5-4 NC-503
6
Type in the e-mail address of the recipient.
– When the destination address is entered, “OTHER SETTING=,”
appears. The transmission size and resolution for sending Internet
faxes can be specified. These settings are applied when a transmis-
sion is specified using the procedure for Internet fax transmissions.
The settings are not applied when a transmission is specified using
the procedure for Scan to E-mail transmissions. For details on the
Scan to E-mail operation, refer to “Performing a Scan to E-mail op-
eration” on page 6-1.
For details on Internet faxing, refer to the User’s Guide for fax kit
FK-506.
7
Press the [OK] key.
After the message “REGISTERED” appears, the “DIAL REGISTRA-
TION” menu appears again.
Registering speed dial destinations
1
Press the [Utility] key in the control panel.