Konica Minolta bizhub C10 - Manual (Page 64)

One-Touch Dialing 58
Changing/Deleting One-Touch Dial Information
The registered one-touch dial information can be corrected.
1
Press the Menu Select key, then the , key three times.
2
Check that the FAX REGISTRATION screen appears, and then press the
Menu Select key.
3
Check that the ONE-TOUCH DIAL screen appears, and then press the
Menu Select key.
4
Press the one-touch dial key that you want to change or delete.
5
Press the Cancel/C key.
"
If a one-touch dial key programmed with a group of fax numbers is
pressed, the message “GROUP” appears in the upper-right corner of
the screen. To delete the group, press the Cancel/C Key.
"
To change group dialing, refer to “Changing/Deleting Group Dialing
Information” on page 62.
6
Using the * and ) keys, select either “EDIT” or “DELETE”, and then
press the Menu Select key.
"
If “EDIT” was selected, the name is displayed. Continue with step 7.
"
If “DELETE” was selected, the settings programmed for the one-touch
dial key are deleted and the message “SELECT REGIST.KEY”
appears again. Skip to step 9.
"
When a one-touch dial number is deleted, it is also deleted from the
group dialing that it is used in.
7
Change the name, fax number, modem speed as desired.
"
For details on changing the name, refer to “Entering Text” on page 79.
"
If you try to change the settings for a one-touch dial number used in
group dialing, a confirmation message appears, asking whether or not
to keep the changed one-touch dial number in the group dialing.
If the Menu Select key is pressed, the corresponding one-touch dial
number programmed in group dialing is kept.
If the Cancel/C key is pressed, the corresponding one-touch dial num-
ber programmed in group dialing is deleted.
8
When you are finished making changes, press the Menu Select key.
The message “SELECT REGIST. KEY” appears.