Time adjustment setting, Time adjustment setting] -13 – Konica Minolta Bizhub 215 User Manual
Page 53
bizhub 215
4-13
4.3
Administrator mode
4
[Time Adjustment Setting]
Specify the NTP used to obtain the date and time information.
Configure the settings and click [Apply] to apply the change.
Item
Description
[Time Adjustment Setting]
Select [enable].
[Auto IPv6 Retrieval]
To automatically obtain the address of the NTP server in IPv6 , se-
lect [enable].
Other items must be configured as shown below in advance.
•
[Network Tab ö IPv6 Configuration ö Use IPv6: ON]
•
[Network Tab ö IPv6 Configuration ö Use DHCPv6: ON]
•
[System Tab ö Maintenance ö Date/Time Setting ö Time Ad-
justment Setting : enable]
•
[System Tab ö Maintenance ö Date/Time Setting ö Auto
IPv6 Retrieval: enable]
•
[System Tab ö Maintenance ö Date/Time Setting ö NTP
Server Address: Null]
[NTP Server Address]
Enter the NTP address in IPv4.
If the DNS server has already been configured, you can enter the
FQDN name instead.
[Port No.]
Enter the port number of the NTP server.
The initial setting is 123.
[Auto Time Adjustment]
To automatically connect to the NTP server and correct the time,
select [enable].
[Polling Interval]
When automatically correcting the time, specify its interval on a
hour basis.