Konica Minolta Bizhub 215 - Manual (Page 66)

bizhub 215 4-26
4.3 Administrator mode 4
4.3.21 [Address] - [Speed Dial Setting]
You can check and register speed dials.
Registering speed dials
You can register fax destinations, E-mail destinations, E-mail destinations using LDAP Search, and FTP/SMB
server addresses for speed dials.
To register a transmission address, register to any number of 001 to 250. To register a FTP/SMB server ad-
dress, register to any number of 251 to 300.
1
Click the speed dial number to which you want to register a destination.
The screen for registering speed dial numbers appears.
2
From the drop-down list, select a transmission method to be registered, then click [Apply].
% If you have specified a registration number of 001 to 250, select the transmission address type you
want to register from [Fax], [E-Mail], and [LDAP Search].
% If you have specified a registration number of 251 to 300, select the server address type you want
to register from [FTP] and [SMB].
% If [LDAP Search] is selected, go to Step 3. If any of other destinations is selected, go to Step 5.
3
Select search items on the LDAP server, enter the search text, then click [Apply].
% Configure the settings for connection to the LDAP server in the [Network] tab.
4
Check the desired destination address from the search results of the LDAP server, then click [Add].
Item Description
[No.] The speed dial number is displayed. (001 to 300)
[Name] The destination name registered for speed dial is displayed. This is
the name to be displayed on the Control Panel.
[Address] The destination address registered for speed dial is displayed. De-
pending on the destination type registered in the one-touch dial, ei-
ther the fax number or E-mail address is displayed.
[Delete] Click the button to delete the speed dial.