Konica Minolta bizhub 25e - Manual (Page 83)

3-16 Various printing methods
Printing with a margin
You can set the binding position and margin for the paper.
You can specify these settings for one side or both sides of the paper.
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
ABCDEFGHIJKL
NOTE
The image is shifted according to the set margin, so a part of the image could run off
the paper when the margin is added.
1
Open the printer settings screen on the computer (page 3-4) .
2
Select “Printer Features”.
3
Select “JCL1” in “Feature Sets”.
4
Specify the margin in “Binding Width (Front)”.
5
To add margin on the backside of the paper, select “JCL2”.
When you print only on the front side of the paper, proceed to step 7.