Konica Minolta bizhub 25e - Manual (Page 96)

1
2
3
4
Operating on control panel
Setting the print controller 4-7
Setting the print controller
NOTE
• This setting is used only when you cannot specify the settings on the printer drivers.
When settings are available on printer drivers, those settings will be used.
• This setting is displayed only for PCL 5e or 6 printer drivers is installed.
Setting procedure
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “My MFP Menu”
screen is displayed.
2
Press [Default Settings].
3
Press [Printer Settings].
4
Press [Print Controller Setting].
5
Select the item you want to set.
For details about setting items, see the “List of print controller settings” (page 4-8) .
6
After setting, press [Close].