Konica Minolta bizhub C35P - Manual (Page 242)

Status, Error, and Service Messages 9-37
Error Messages (Warning: )
"
“I-UNIT” in a message refers to the imaging unit.
REBOOTING
The printer is being
restarted. No action needed.
WARMING UP
The printer is warming up.
OFFLINE
The printer is offline. To print on a
network, change
the
TELNET
setting so it is
online.
This message... means... do this...
AUTH TIMEOUT
The user is automati-
cally logged off due to
IEEE802.1X port
authentication. Reauthorize the
IEEE802.1X port, and
then log on.
FUSER UNIT
END OF LIFE
The fuser unit has
reached the end of its
life. Replace the fuser unit
and reset the counter in
the
MAINTENACE
MENU/SUPPLIES/
REPLACE/FUSER
UNIT menu.
"
Printing can
continue,
however, the
printing result are
not guaranteed.
HDD
NEAR FULL
The hard disk is full. Delete print jobs saved
on the hard disk.
INCORRECT
HDD
Since the hard disk kit
HD-P03 was
formatted with a
different machine, the
hard disk kit could not
be used. Replace the hard disk kit
HD-P03 with one
compatible with this
machine, or select
HDD
FORMAT from SYS
DEFAULT MENU
and
format the hard disk.
This message... means... do this...