Konica Minolta bizhub 184 - Manual (Page 69)

Printer driver settings 7
7-4 bizhub 184/164
7.2
Prin
te
r f
unct
ion
Ch
apt
e
r 7
7.2.2 [Setup] tab
Configure the basic printing functions such as paper size and type as well as output method.
The same sizes and types of paper used with the machine can be selected. For the types of paper to be used,
refer to page 12-2.
Function name Description
[Orientation] Select the orientation for the original.
[Original Size] Select the paper size of the original.
[Edit Custom...] Frequently used custom sizes can be registered and later called up during
paper size setting.
A name can be assigned for the set paper size for registration.
Up to 32 sizes can be registered. Up to 20 characters can be entered for
the registered name.
[Output Size] Specify the output paper size.
If it is different from the original size and the zoom is set to [Auto], the out-
put image will be enlarged or reduced to fit the size.
[Zoom] Select an enlarge or reduce ratio.
[Copy] Specify the number of copies to be printed.
[Collate] Select this check box to collate pages sequentially when printing multiple
sets of copies.
[Paper source] Select a paper tray to be used.
This function can be selected when the optional Bypass Tray is installed
on the machine.
If [Auto] is selected, the paper tray with paper of the size selected in [Orig-
inal Size] is used.
[Paper type] Select a paper type to be used for printing.